0510325006 BOSCH REXROTH GEAR PUMP AZPF-11-005RCB20MB

Description

SMC
NORGREN
ITT
BALLUFF
BURKERT
PARKER
VICKERS
ASCO
YUKEN
TESCOM
WANDFLUH On/off valves
eckerle
HAWE
ATOS
MOOG
NACHI
REXROTH
other
Add my Store to your Favorites and receive my email newsletters about new items and special promotions!
0510325006 BOSCH REXROTH GEAR PUMP AZPF-11-005RCB20MB
Product descrip
0510325006 BOSCH REXROTH GEAR PUMP AZPF-11-005RCB20MB
0510325006 BOSCH REXROTH GEAR PUMP AZPF-11-005RCB20MB
Your product
AZPF-11-005RCB20MB
0510325006
Type code
Type code single pump
Note
You can find diagrams for a rough calculation in chapter "Diagrams / Characteristic curves".
General technical data
Weight
m
kg
See chapter Dimensions
Installation position
No restrictions
Mounting type
Flange or through-bolting with spigot
Line connections
See chapter Dimensions
Direction of rotation, viewed on drive shaft
Clockwise or counter-clockwise, the pump may only be driven in the direction indicated
Drive shaft loading
Axial and radial forces only after consultation
Ambient temperature range
ϑ
°C
-30 to +80 with NBR seals (NBR = nitrile rubber)
-20 to +110 with FKM seals (FKM = fluoroelastomer)
Features
Consistent high quality based on large-volume production
Long service life
Slide bearings for high loads
Drive shafts according to ISO or SAE and customer-specific solutions
Line ports: connection flange or screw thread
Combination of several pumps possible
Product description
General information
It is the central task of external gear pumps to convert mechanical energy (torque and speed) into hydraulic energy (flow and pressure). To reduce heat losses, Rexroth’s external gear units offer very high efficiencies. They are realized by pressure-dependent gap sealing and highly precise production technology.
Rexroth external gear pumps are built in four frame sizes: Platform B, F, N and G. Within each platform different displacements can be realized by different gear widths. The pumps are available in the versions Standard, High-Performance, SILENCE und SILENCE PLUS. Further configuration variants are given by different flanges, shafts, valve arrangements and multiple pump combinations.
Construction
The external gear pump consists essentially of a pair of gear wheels supported in bearing bushes and the housing with a front and a rear cover.
The drive shaft protrudes from the front cover where it is usually sealed by the shaft seal ring. The bearing forces are absorbed by slide bearings. These are designed for high pressures and have excellent dry-running qualities, especially at low rotational speeds. The gear wheels have 12 teeth. This keeps both flow pulsation and noise emission to a minimum.
The internal sealing of the pressure chambers is achieved by operating pressure-dependent forces. This ensures optimum efficiency. On the outer face, the movable bearing bushes are pressurized with operating pressure and pressed as seals against the gear wheels. Special seals form the boundary of the pressurized zone. The radial sealing at the tips of the gear teeth against the case is provided by smallest possible gaps that are formed pressure-dependent between the gear wheels and the housing.
Assembly external gear pump
SHIPPING
PAYMENT
Warranty & Returns
Contact us
About us
SHIPPING
Thanks for your bid.
Item will be shipped from Hong Kong post on the 48 hours after your full payment has been received.
!!Rate the seller on the time it took to mail the item, not the time it took you to receive the item!
! See the ebay policy
here
Delivery time:
----By Airmail: Generally, about 2-3 weeks to UK, USA, AU.
PAYMENT
Only through PayPal
Warranty & Returns
Return & Refund
Refund or replacement request is available only the requests within 1 week after parcel received & returning the item as the same condition as received.
Please contact us to request a return authorization. Your name, auction number, and reason for return should be included in the email. All items returned must contain all original packaging materials.
Please repack the item carefully. Items returned will be tested and a new replacement will be shipped to the buyer immediately when found defective. In the event that a suitable replacement is not available then a refund will be issued. Shipping, handling and insurance fees are non refundable.
If the item is found non-defective, the item will be sent back to the buyer at buyer's expense. Items returned without RMA number will be refused and returned to the sender. Buyer is responsible for All Return Postage and Shipping Charges. Buyer is responsible for additional shipping costs for items that are returned refused and/or undeliverable. We do not accept any returns without an authorization number on the box or label it is being returned in.
CONTACT US
We live for the moments that we can make you happy—that's the truth!
Most of our business occurs through the internet. However, we know that there are times when you need to communicate with a person. Our customer service staff is here to help you. You can contact us in the way that works best for you.
ABOUT US
hk-industrial-supplus is a high-tech enterprise engaged in advanced electro-hydraulic control technology, with nearly two decades of professional experience. hk-industrial-supplus has always been following closely the development of the world's hydraulic technology, especially that of high-tech components such as digital proportional valves and servo valves, and that of the design of hydraulic system, etc..
To ensure our customers the most reliable technical solutions and guaranteed services, hk-industrial-supplus has organized many official visits to major foreign companies well-known in hydraulics industry, taking technical training courses and learning their modern management philosophy. Long time of contacting, learning and communicating have helped hk-industrial-supplus and these companies establish deep cooperations in such respects as brand promoting, product delivery and technical consultations.
Thanks to so many years of technical experience and skills, hk-industrial-supplus can provide the customers with the most reliable and cost-effective solutions, as well as quality hydraulic components with foreign origin.
hk-industrial-supplus mainly deal with the following businesses:
—Distributing Atos, Bosch Rexroth, Parker, Eaton Vickers, Hydac, etc.
—Design and manufacturing hydraulic control systems (especially proportional and servo systems) and test benches;
—Providing electronic amplifiers and axis controllers and necessary solutions;?
—Supplying components for special hydraulic industries (super-high pressure, extreme temperatures, special fluids, etc.);
—Repairing piston pumps and proportional valves;
"Hydro-power in Need, hk-industrial-supplus on Hand".
Choosing hk-industrial-supplus means the selection of best quality, guaranteed service, competitive prices and on-time delivery.
Our working time:
Hong Kong time :Monday to Friday 9:00 am to 4:30 pm.
We do not work holidays in Hong Kong.
if you send email to us,In our working hours will be resumed within 48 hours.
If you we are not satisfied with the product or service ,please contact me and don't give us negative or natural feedback,We must give you a satisfactory solution.
Feedback & DSRs (Detailed Seller Ratings).
We depend on our eBay reputation and customer satisfaction to succeed.Therefore, Your feedback and DSRs are extremely importantto us as better DSR scores affect our search placement on eBay.
We would like to earn your good feedback and 5 star DSR rating. Your action will help us offer our milk and bread . If we have not given you reason enough for 5-star grades on each DSR then please let us know how we can earn your 5-star rating before submitting yourscores!
FEATURED ITEMS
IGF2- 16RE20VU2 NEW REXPAR PUMP
00
Buy It Now
REXPAR-0631-0400B 0-400BAR G1/4 Bottom

Buy It Now
REXPAR-1001-3500B 0-3500BAR G1/2 Bottom
0
Buy It Now
REXPAR-1001-0250B 0-250BAR G1/2 Bottom
00
Buy It Now
Store Home
|
All Listing
|
ABOUT US
|
Feedback
|
CONTACT US
|
Add to FAVS
Copyright © hk-industrial-supplus. All rights reserved.