-40%
Unipolar. Hall Effect Sensor. Output Current 100mA. Supply Voltage 3.8V-32V.
Unipolar. Hall Effect Sensor. Output Current 100mA. Supply Voltage 3.8V-32V.

Unipolar. Hall Effect Sensor. Output Current 100mA. Supply Voltage 3.8V-32V.

$ 3.3

Availability: 1002 in stock
  • Model: Unknown
  • Refund will be given as: Money Back
  • Return shipping will be paid by: Seller
  • All returns accepted: Returns Accepted
  • Country/Region of Manufacture: Unknown
  • Restocking Fee: No
  • Item must be returned within: 30 Days
  • Brand: Unknown
  • MPN: Does Not Apply
  • Condition: New

    Description

    Description
    :
    Hall Effect Sensor. Unipolar Switch. 100mA. 3.8V-32V.
    Note:
    Looking at the black head of the Hall Effect Sensor, the side that has a writing of 05L is the top face and the other side is the bottom face.
    Place the Hall Effect Sensor so that the bottom face is against the table and top face is the face that you can see. Looking down at the top face with the pins facing towards you. The first pin is the Positive (+), the second pin is the Ground (-) and the third pin is the Output.
    The output current flows when the South pole is facing the top face and turns off when the South pole is removed.
    Notes:
    1) Do not exceed the limits of the sensor especially the output current limit
    . Use a resistor or other components when needed.
    2) For applications requiring a higher output current greater than the maximum output current rating, use an amplifier such as a transistor to carry that amount of current.
    3) For DC Motor applications, remember to use a diode to drain the spike voltage that occurs when the current is automatically turned off.
    Basic Specs:
    Supply Voltage minimum:
    2.8V
    Supply Voltage maximum:
    32V
    Supply Current:
    4 mA
    Output Current max:
    100 mA
    Operating Temp:
    -40 to 302F
    Junction Temp:
    -40 to 302F
    Storage Temp:
    -58F to 302F
    Operating point min:
    7 mT
    Operating point max:
    18 mT
    Release point min:
    5 mT
    Release point max:
    16 mT
    FEATURES/BENEFITS
    ·
    Built-in voltage overshoot protection.
    ·
    Built-in power reverse protection.
    ·
    Output protection against electrical disturbances.
    ·
    3.8V to 24V DC operation voltage.
    ·
    For Unipolar and Alternating Magnetic Fields.
    ·
    Digital Output Signal
    ·
    Wide operating voltage range.
    ·
    Large Temperature Range.
    ·
    Temperature Compensated Magnetic Performance.
    ·
    Easy to use.
    ·
    Durable.
    ·
    Safe.
    ·
    Well designed
    ·
    Easy to install
    TYPICAL APPLICATIONS
    ·
    Brush-less DC Motor Commutation.
    ·
    RPM Detection.
    ·
    Consumer and industrial position sensor.
    ·
    Position Indicator.
    ·
    Proximity Indicator.
    ·
    Rotation Indexing.
    ·
    Flow meters.
    ·
    Ideal for making electromagnets.
    ·
    LED blinkers and pulsations.
    ·
    Relays.
    ·
    Electronic communication.
    ·
    Inductors.
    ·
    Radiofrequency.
    ·
    Solenoids.
    ·
    Small Transformers.
    ·
    Motors
    ·
    Timer.
    ·
    Automotive.
    ·
    Industrial
    ·
    Environmental Solutions.
    ·
    General.
    ·
    Laboratory.
    Sellers Comment:
    Please if you have any problem with the product or shipping method, please contact before leaving a neutral or negative feedback and the issue would definitely be taking care of. It is an optimum responsibility to make sure that you are a satisfied customer. Thank You.